PacificNG Header
PacificNG Header 
Printer-Friendly Format

The Bloggery.

November 22, 2013

Forum Changes

By: Andrew Brandon

In the past few weeks several large websites were hacked and their passwords databases stolen. Since that time, the number of spam postings has increased thanks to this new pool of email addresses. For the time being I have disabled self registrations for the forum. New registrations will have to be activated by the Admins themselves. We do hope that we can roll this measure back to save on annoyances in registering.

We’ve also discovered that email notifications were not working as intended. After making some changes, I seem to be receiving them again. Please help us test this by posting or responding to a message under “Site Technical Issues”.

November 1, 2013

A long overdue update…

By: Randy Hees

Too often we wait for the next big thing to drive a blog post… Instead this post is an amalgamation of notes and such… Kind of a occasional status report…

First sad news… Recently Bill Barbour long time narrow gauge enthusiast died of a heart attack suffered while working on Nevada Central No 2, the Emma Nevada. He was best known for his association with the Grizzly Flats collection at Orange Empire. He had also authored articles for the Southern Pacific Narrow Gauge Society and was seen driving the first truck delivering the first ties to the then new SPCRR at Ardenwood in 1984 or so. Reports suggest he was inside the boiler of Emma when struck down… we can all hope for such a proper fate…

Regular users may have noticed that the forum has been slow… that the site can occasionally be slow… this in part a server issue, but is also an issue with the template which gave the forum its custom appearance… for now we are using default appearance while Andrew reworks the code… It’s not as pretty but it will work. Andrew continues to monitor it, adjust it, reset and repair it. Though on occasion Andrew can be tied up elsewhere and may not notice the slow downs immediately. If you have any issues, please use the Contact Us page to send us a bug report. Don’t underestimate Andrew’s efforts to make this site what it is… this is the big bad world of the internet and electronic communications….

Even with the work on maintaining the forum, there have been and will continue to be updates… particularly adding write ups on various narrow gauge railroads… In February we posted reports on the California & Nevada Railroad. by John Hall as well as two on Hawaii railroads, the Koolau Railway & Oahu Railway & Land Co. both by Jeff Livingston. I am working on write-ups for the Calico & Daggett, the Borate & Daggett and the American Borax Railroads as well as Old Mission Cement, Andrew is always working on Colusa & Lake and Nevada County Narrow gauge, along with any and all Prismordial railroads. Others are encouraged to submit articles on railroads to be added

Coming soon (“soon” being a poorly defined concept):

Sumpter Valley Railway (w/ Map)

Yellow Pine Mining (Nevada, w/Map)

Copper Creek Railroad (w/Map)

US Navy Pearl Harbor by Jeff L

U.S. Gypsum (w/Map)

Andrew would like to promise Eureka Mill… but history suggests that might be a mistake… but, someday when you least expect it, it too will appear…

Finally, we have two upcoming events… first, on May 3rd we will have a group visit to the North Western Pacific Historical Society archives and library in Petaluma.   There are currently three of us attending, but more would be welcome. Sonoma Valley seems to be one of the many targets mentioned. A week later, May 8-10 we will join the SPng Historical Societies annual conference in Independence California.

We expect to announce additional events… Railfair at Ardenwood over Labor day looks like a likely target…

Beyond that, we would welcome other’s contributions… The site is valuable because of the information it holds… You can contribute to the information…

Thank You, Randy

September 3, 2013

A weekend with our caboose

By: Randy Hees

It was Railfair at Ardenwood this weekend. The locomotive this year was Cortez Mining “AnneMarie” a 1890 Porter 0-4-0, returning for the 5th year. There was wonderful coal smoke waifing over the farm…
Our restoration demonstration was our NWP caboose, 5591… the car was restored c.1970 by Bethlehem Shipyard in SF under supervision of the Railway Locomotive Historical Society for their proposed Fisherman’s Wharf museum. That museum never happened, and the car was given to the California State Railroad Museum, who gave it to us some years ago.

We are now trying to undo the old bad work (a lot of bad work), identify what is left of the original car (surprisingly a lot) and bring the car up to modern museum standards.
A couple of years ago our efforts were centered on rebuilding the platforms and draft gear and the cupola. The (1970’s) restored draft gear was a fantasy which would not only have failed under use but could have hurt someone… After reworking the draft gear and platforms the car is now pull-able, push able, and usable… That work required removing the first 5′ of the floor… a plywood floor… As far as I can tell railroads didn’t use plywood in the 1920’s but that did not stop the shipyard from using it in many unfortunate ways…

The cupola work was required as a result of a low bridge encountered when moving the car to our site… The pilot car misread the over height moving permit, removing the cupola from the car with great prejudice… I reassembled the remains, gluing parts together and we put the thing back on top where we found it when CSRM donated it to us…. It still is lacking window sash and some moldings… but mostly it’s back up there where it belongs.

The cupola and draft gear were the first phase of what is a much bigger project… with it done, and the car tarped things slowed…

In early August we pulled the car back to our new carhouse… or at least near our new car house… there was track missing between the “end of track” and the carhouse, and 5 or so cars in the way…. But we owned the building, and could put things inside, and took the stuff, interior walls, seat boxes and one of the cupola seats and took them out of the car, and stored them in the building… We then pulled the car back to the front of the park where it lives…

So, as Railfair started, we had a car which was mostly clear of “stuff”, but pretty dirty… Saturday we opened the car to visitors while we cleaned it out… We pulled more of the plywood floor… we started to fit new subfloor… The floor system (as we believe it was originally) was two layers of 1x material (random widths) with DF T&G over…

Saturday was spent sweeping and getting the car ready for work. We sanded new paint windows and documented the interior colors (there were lots of layers) and pulled out several sheets of plywood.
By Sunday we were putting down the new subfloor… We quickly burned through the material on hand, but new bright clean boards were going down and people were starting to invision the process, and were getting excited… Monday I picked up more wood… work continued, with much of the work focused on the door threshold and the planking over the bolster, with cutouts for the king pin and reliefs for the truss rods. With the time consuming stuff done, laying planks quickly. In the last hour of railfair we reached the half way point.

We saved the best for last… As I left the park a bit after 5:00, 5591 was in the front curve, headed for the car house where it will now live.

July 20, 2013

Alaska Calling…

By: Randy Hees

So, since the trip (see last blog post) to Alaska, Alaska has become the research project of record.
I regularly find myself lost in research, chasing one lead to the next. Sometimes it starts with a photo… and I go looking for information… other times its something in an article… maybe it starts with a question… On this occasion it was the intersection of all of the above…

It started with a question on the PacificNG prototype Locomotive forum, about an now preserved Porter locomotive from the Cliff Creek railroad in the Yukon (Alaska and Yukon railroad history is frequently intermixed, not always in ways that make things clear…) It turned out that the locomotive in question was on the Coal Creek line, not Cliff Creek… (there is also operation on Bear Creek.) The roster research lead me in two directions… to the locomotive’s origin (a steam dummy line in Spokane) and to one of the other engines on the Coal Creek line was for the Yukon, unique, a small Lima shay, working among 0-4-0t and 0-6-0t Porters.

I “chased” the shay to a railroad near Juneau Alaska (note, not the Yukon, really Alaska) where it was used to build the Salmon Creek dam and associated hydroelectric plants… that lead to a porter 0-4-0t, (now restored and owned by a gentleman in Nevada) from a little known Alaska line, the Berner’s Bay Mining Company. Research into both Salmon Creek and Berner’s Bay followed, that in turn lead to Annex Creek and it’s railroad, which also supported a dam and hydroelectric project…

Other projects interviened, and my interests moved on…

Then, in April I received a question via email about “lost” locomotive from Gabe Emerson… He is from Down East, (although now living in Minnesota) and has a blog about the abandoned machinery found in coastal Alaska and was in search of an engine from the Furner Bay railroad. (A railroad sufficiently obscure that it isn’t mentioned in Clifford’s Alaskan/Yukon Railroads, and about which Google only finds 6 references, two of which are Gabe’s) We exchanged a couple of emails, including a mention of an engine left upside down in Sheep Creek… A known but somewhat mysterious artifact.

Soon after, I found myself in Juneau Alaska with Kyle (see my previous blog post.) That project revolved around a 18 ton electric railroad locomotive. The project was more about locomotive as museum object, but as a museum object history is important, and Kyle and I are probably incapable of looking at a railroad object without considering its history, and since we were working with the Alaska State Museum (and Archives, they are closely tied) we had access to lots of historic documents. To make things more interesting, The museum’s electric locomotive was used on a line up Sheep Creek… and drew its electric power from the Salmon Creek and Annex Creek hydroelectric plants, and since he was in Juneau, Kyle asked about the Sheep’s creek mystery engine…

As part of the project Kyle and I put together a presentation to be given at the Museum… a part of it was a survey of the local railroads… We both had brought our notes on Alaska and its railroads, and in Kyle’s notes, he found a newspaper report that may make the mystery locomotive less mysterious… More on that later…

The presentation went well, and we looked like the “Pros from Dover” (gratuitous MASH reference) but in creating the presentation we realized how much we didn’t know, which on return has lead to research…
Now, back in the lower 48, I have had several long conversations with Don Marenzi, a friend who is probably the leading expert on Alaska railroad history… Don’s information lead to more research… Research which continues… I wrote a blog post for this site about our trip…

Gabe has since made a trip that included a trip to Nevada to visit the locomotive from Funter Bay he was searching for… (it is in a private collection with another engine from the Salmon Creek and Annex Creek dam projects, and a third from an Alaskan copper mine) More emails have been exchanged… I believe I have found a fellow traveler… Gabe and his blog and website, particularly his page on Obscure railroads of Alaska. I highly recommend it.

Randy